Bypass the SP-lock

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIM locked to one privider you can bypass the SP lock like this-

Insert sim card of diferent provider.

Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE ?

Press the "C" key.

Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says- PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.

update-
On version 5.04 Nokia has removed this option !

Unlock Service Provider Lock

Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code. With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this-

First of all, PIN CODE MUST BE ON, then press-

C

C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04***your pin>#

Each time you turn your phone OFF it resets the lock, so this need to be done each time you ll turn your phone ON

The phone now says- PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.

NOTE- On vesion 5.04 Nokia has removed this option.

update-
There s another Nokia service provider lock generator for DOS (somewhere on the net) called 5161un.zip (for Nokia 51xx-61xx models) This program uses the #pw+(master code)+1# code to unlock the phone. With this software you need to have a access to the eeprom.

How can I check what locks have my phone closed?

There is 2 methods-
Use winlock to see the state of the locks, pressing Read Info.The Counter is the number of times that you have tried unlock your phone using an incorrect master code.
You can check it entering an imaginary mastercode on your phone but, it s not recommended because if you try enter a code 5 times your phone will not work anymore. By example, if you press at your phone #pw+1234567890+2# (note that # , p , w and + characters must be selected from * key) and your phone give you Code Error then your phone have lock 2 closed, if you get the message SIM Restriction Off your phone have lock 2 opened.

Look the table above to see how can check all locks-

Lock number Description Sequence to Check
1 Provider Lock #pw+1234567890+1#
2 Network-Lock #pw+1234567890+2#
3 Another Provider Lock #pw+1234567890+3#
4 SIM Card Lock #pw+1234567890+4#

SP Lock The Service provider (SP) lock

Is used to lock the cell phone to the SP s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it.
The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)
The main code used in Nokia phones is:

#pw+(master code)+Y#

This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
Y has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status

(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code SO DON T ASK ME FOR IT! )

Please click here to learn more about how to obtain mastercode and find out the lock status of your phone
eq. To remove restriction on lock 1 type following code-

#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eq. To check if phone if restricted on lock 1 type the following code-

#pw+1234567890+1#

Please NOTE that these codes could be used with care.
A user told me that it s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Waranty Code *#92702689# [*#war0anty#]

Menu-
Displays Serial Number.
Displays the Month and Year of Manufacture (0698)
Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date
(Warning- You can only do this once - so be careful what you write)
Displays the date of the last repairment - if found (0000)
The next screen has Transfer User Data? (the same option as the 8110)
To exit turn the phone off and then back on.

Nokia 5110

IMEI Number *#06#
For checking the IMEI (International Mobile Equipment Identity).

Security Code 12345
Default security code is 12345. If you forgot your security code, there s so many program on the net which allowed you to know the security code likes Security ID Generator, Nokia IMEI Changer, etc.

update-
Security ID Generator (SID.EXE) and IMEI Generator (NOKIAIMEI.EXE) doesn t works with Nokia 5110
Resetting Security Code

If you accidentally lock the phone or forgot the security code, the best thing to do is check it with your local Nokia dealer. For advanced user, you can use WinTesla, PCLocals or LogoManager program to read the security code or resetting the code (You will need an FBUS/MBUS (or compatible) cable to do this.

Mobile Cheat Stuff

Displays -
1.Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode -you need to switch your phone off then on again

24 *#94870345123456789# Deactivate the PWM-Mem

25 **21*number# Turn on "All Calls" diverting to the phone number entered

26 **61*number# Turn on "No Reply" diverting to the phone number entered

27 **67*number# Turn on "On Busy" diverting to the phone number entered

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button



Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).

Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate /td> **67*number#©<
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below)
Call barring
Activate barr all outgoing calls (see Security to set code) **33*code#©
Deactivate barr all outgoing calls #33*code#©
Check status of barr all outgoing calls *#33#©
Activate barr all calls **330*code#©
Deactivate barr all calls #330*code#©
Check status of barr all calls /td> *#330*code#©<
Activate barr all outgoing international calls **331*code#©
Deactivate barr all outgoing international calls #331*code#©
Check status of barr all outgoing international calls *#331#©
Activate barr all outgoing international calls except to home country **332*code#©
Deactivate barr all outgoing international calls except to home country #332*code#©
Check status of barr all outgoing international calls except to home country *#332#©
Activate barr all outgoing calls **333*code#©
Deactivate barr all outgoing calls #333*code#©
Check status of barr all outgoing calls *#333#©
Activate barr all incoming calls **35*code#©
Deactivate barr all incoming calls #35*code#©
Check status of barr all incoming calls *#35#©
Activate barr all incoming calls when roaming **351*code#©
Deactivate barr all incoming calls when roaming #351*code#©
Check status of barr all incoming calls when roaming *#351#©
Activate barr all incoming calls **353*code#©
Deactivate barr all incoming calls #353*code#©
Check status of barr all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©

For All Airtel Users

Requirements-
1. Airtel live (available 4 free)
2. Nokia series60 handset eg 6600,6630,n series,7610,6670 etc
3. Opera wap browser 4 mobile
Procedure:-

1. Go to ur connection settings and make a new internet profile using the default settings of airtel live. name that new profile as nething(for eg masala)-change the home page of that profile to nething u like for eg www.google.com.

2. Go to ur Opera browser and set the default connection as AIRTEL LIVE. this is the original settings u received thru airtel.

3. Go to the services(in n6600) and Web(N6630) and change the default profile for connection as masala (newer one).

**Note- always make sure that ur access point is airtelfun.com

Apply-

1. Open Opera and u will see that homepage of Airtel Live is opened. Minimize the application.

2. Now open web using the duplicate Profile and u will see that two gprs connections will work simultaneously and at the web or the services page it will show "Unable to connect" or any error. well thats the signal of ur success.

3. Simply go on the Opera with web on and open any site u want for free. No Charges No nothing.

U can also use it through ur computer..........
someone said dis too

The main principle behind this is we hav 2 fool the bsnl techies 2 activate portal and thus get gprs activated / get "G" signal on ur cell as bsnl portal (wap.cellone.in) needs "gprs signal on ur cel (whether gprs is formaly activated/registerd or not (by my method )i dont know)

NORMALLY THEY DONT DO THAT INSPITE OF THE FACT THAT THEY SHOULD ACTIVATE GPRS SIGNAL SERVICE FOR PORTAL...
AND THEY WILL GIVE U NO OF REASONS----
---THAT portal is message based , so go to cellone icon in menu and use that sms based portal (what the f**k)
---THAT portal service will be activated when u will activate gprs by filling up form and registering at nearest CCN..
---THAT ur handset has some problems (if u say that "G" signal is not present)
----etc,etc..

U HAVE 2 ACTIVATE PORTAL FIRST WHICH IS FREE AND U CAN EAT UP CC'S FOR THIS REASON!!
SO WHAT U HAV 2 DO IS--
1) SEND PORTAL to 3733 AND CONFIRMATION SHD COME WITH 5 MIN AT-MAXIMM !!
2) SEND FOR ATLEAST 20-30 TIMES (CAN B ANY MORE THAN THAT)
JUST S**K UP THE NETWORK(3733) WITH THESE MESSAGES !!!
THAT'S FREE NO!! BOTH ON POST AND PRE!!
3) NOW ALONG ALSO SEND 20-40 SMS AS GPRS TO 3733
(NO OF SMS DIRECTLY PROPORTIONAL 2 HATE FOR BSNL AND HOW EARLY U WNAN GET UR GPRS ACTIVATED) this is also free both on post and pre!!
4) U WILL GET CONFIRMATION IN BOTH CASES AND MSG TELLS U 2 GET SETTINGS FROM 9400024365, THE NO OF CC!!
HERE AT MY PLACE I CAN DIAL 9419024365 ALSO!
BOTH R TOLL FREE AND BOTH R LOCATED IN CHANDIGARH!!!
(((((((AND SOME OF THE CC'S SAY they cant give such sensitive information that where they r located, as if thay have a 3 rd world of their own! and the other dumbs said that they r in chandigarh!!!!)))))

I WOULD ADVISE ALL FIRST, 2 call them once 2 get the settings!!
(most of the times that is incorect but gives u an idea of settings in ur area))
Try and in ur 1 st call only,
talk roughly and tell them u r calling 10-20th time just for settings and is that their service!!!
5) Now when u get them save them AND plz post them here!!!
6) now GET ATLEAST 2-3 COMPLAINTS REGISTERED( each after 1 day) THAT UR PORTAL HAS NOT ACTIVATED AND GET THEIR SERIAL NO.
and in the end bombard them abt the status of all those complaints !!
b4 registering ur complaint they will hesitate much and always say taht they will b sendin new settings which r accurate! but dont belive them and just register complaints!!
6)AFTER THAT, u have 2 only wait until "G" signal is there on ur screen!!

LOOK, WHAT I HAVE WRIITEN ABV IS METHOD by which i got activated my "G" service !!! without fillin any form or such and without any money drain!!
may be since it bypasses the formal way of registeration, that is why this trick is working !!!!!!!!!!!!

U may also Try this

first open ur msg window and type LIVE and send it to 2567 so that after 5 min u get the setting of Airtel Live or if u have already no need for this procedure.
now then open that setting and copy all the settings from it and create one access point manually which has all the settings like Airtel Live has.
now only one change will be there and it would be in access point name which is "Airtelmms.com" instead of originally "Airtelgprs.com".
ok u've done it just active that setting and access free airtel gprs on ur phone.
Another Trick

somya_cse
You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows

Connecting Device - Your mobile’s modem
ISP Name - Airtel (or anything you like)
Phone Number - *99***2#
Username and Password - blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load


main thing is the advance initialization command.

a recent comment says dat
Guys i tried and its working, I'm using airtel chennai,..the Method TWO worked, also i request everyone to change the Phone number from *99***2 to *99***1 and its working,.. it'll get connected at 462.8kbps but its the speed between the phone and your computer but actual BAndwidth is 42kbps

Airtel Hack for free internet

these are all the tricks available
working too!
It cannot go beyond this

This write up will explain to you how to speed up your Airtel Broadband connection / solve other problems regarding connection failures due to closed ports.


Although I use Airtel and a Beetel 220 BX modem as my basis for this write up, the same rules can be applied to others as well. So lets get started. First thing make sure your DSL modem is on. Fire up your browser. Type http.//192.168.1.1 as the address with the following Username/Password - Username - admin Password - password Note - These are case sensitive. Make sure all are typed in lowercase. Click on Advanced Setup -> NAT in the page that loads. If you do not see these options try entering http.//192.168.1.1/main.html as the address. Some routers/modems deliberately try to prevent users from accessing these options. On the NAT virtual servers page click the add button. Now add the port number that you wish to open up. You can even open up a range of ports using the add button. You should see something similar to the screenshot below. Click it to view full image


This technique can be used for any operating system / modem / service provider. It may vary slightly but the essential principle remains the same.

cheers
You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows

Connecting Device - Your mobile’s modem
ISP Name - Airtel (or anything you like)
Phone Number - *99***2# / Try 99***1
Username and Password - blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal. 

TWO

Under DATA COMM

APN - airtelfun.com

USERNAME - blank

PASSWORD - blank

PASS REQ - OFF

ALLOW CALLS - AUTOMATIC

IPADDRESS -

DNSADDRESS -

DATA COMP - OFF

HEADER COMP - OFF


Under INTERNET PROFILES

INTERNET MODE - HTTP or WAP (both worked for me)

USE PROXY - YES

IP ADDRESS - 100.1.200.99

PORT - 8080

USERNAME -

PASSWORD -

No Risk Here, Try it and Enjoy

BSNL hack for Internet

Free gprs in bsnl

here are the steps to perform-

Logic: the server has a major bug in it, by which it fails to block two simultaneous connections from the phone and establishes a connection with full internet working,

Supported devices- all phones with multichannel gprs support

For connection on your mobile phone-

1) Make two connections like bsnlportal and BSNLPORTAL1

(names of profile don’t matter, u can keep one as billgates and shahrukhkhan lol..the basic purpose of names is to enable the user to differentiate between the two accounts,)

2) Select the application you got to have the full connection working on.
Surpassingly “web” now just select “bsnlportal” profile and select a link like wap.cellone.in the page will get open, just press the red button such that the “web” application goes in the background.
Make sure that the gprs connection is still established with the web app. Two parallel lines on the top left of the screen will confirm this

3) Now open any other app that requires web connection like opera. Select BSNLPORTAL and open any other link like wap.google.com, u will get error –

the aim of using the other app is to perform multi-channel gprs,
this is verified by seeing some dots on the pre-existing connection established by “web”

(step 2)

“Access denied.

Technical description-
403 Forbidden - You are not allowed to communicate with the requested resource.”

4) close opera and open web and open a site like esato.com

5) if everything is done as said here then esato will load and voila! We have the whole internet!

For connection on pc.

1)create a connection and enter the number to be dialed as *99***1#

2) enter the following string as extra initialization command

3)now dial from pc, the connection will be established

4)pick the phone and open “web” open “wap.cellone.in” the phone shows error .

5) close “web” and then from the browser open www.google.com
and voila! The whole intenet is here

settings for profiles

apn: celloneportal
ip: 192.168.51.163
port - 8080

leave other fields blank as they are of the least concern!

the browser settings on pc too go the same as mentioned above!

Nokia 3210/5110/6110

To view IMEI number *#06#
To view Software Version enter *#0000#
To view Status of Sim Clock Stop. Enter *#746025625#
*#92702689# offers you Serial Number and also IMEI number. The code is easier to remember as *#war0anty# (warranty)

To exit turn the phone off and then back on.

nokia cheat codes

*** WARNING: Using secret codes may be harmful to your phone and result in disabling or worse. Use these codes at your own discretion, we accept no responsiblility for blocked pones while using these codes!!!
IMEI Number
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code of the approval-country )
FAC = Final Assembly Code: (01,02 = AEG)

(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)
SNR = Serial Nr.
SP = Spare (always "0"
Software Version
*#0000# shows the software version
Signal Processing
*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.
#3370# - Enchanced full Rate Codec (EFR) deactivation
*4720# - Half Rate Codec activation. It will automatically restart.
#4720# - Half Rate Codec deactivation
Enchanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology.

Sim Clock Stopping
*#746025625#
[*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.
It will tell you if it can be stopped or not.


Warrenty Menu
*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register.


Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#


Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)
The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated.

If you short-circuit the left middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying! Network Monitor
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64)
Read out the data with an EEPROM programmer and save it to a file (Backup)
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"
If you have v5.24 then change the address "0378" from "00" to "FF"
Write the new data to the EEPROM and solder it back to the phone
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information:
Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status, Information on the Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information.


Game Hacking with Blizzard



Get the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on Efnet (note: Downloading cracked/Hacked games is illegal unless you already own a copy of game)
The Blizzard Nokia N-Gage Installer.
1. Unpack Blizzard.sis file that you get from mIRC
2. Transfer the .sis file to your N-Gage
3. Get the .blz (N-gage ROM) from mIRC
4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card
5. Use the Blizzard application to unpack the .blz file
6. After unpacking the sonic icon should appeared in the MENU
7. Clicked sonic icon and it should work !



List of compatible games for the 3650,6600 and the N-gage that work:
[3650]
SonicN (v.2.5+)
Puyo Pop (v.2.5+)
[6600]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
[N-Gage]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button


Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).
Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate /td> **67*number#©<
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below)
Call barring
Activate barr all outgoing calls (see Security to set code) **33*code#©
Deactivate barr all outgoing calls #33*code#©
Check status of barr all outgoing calls *#33#©
Activate barr all calls **330*code#©
Deactivate barr all calls #330*code#©
Check status of barr all calls /td> *#330*code#©<
Activate barr all outgoing international calls **331*code#©
Deactivate barr all outgoing international calls #331*code#©
Check status of barr all outgoing international calls *#331#©
Activate barr all outgoing international calls except to home country **332*code#©
Deactivate barr all outgoing international calls except to home country #332*code#©
Check status of barr all outgoing international calls except to home country *#332#©
Activate barr all outgoing calls **333*code#©
Deactivate barr all outgoing calls #333*code#©
Check status of barr all outgoing calls *#333#©